How to make a dog house out of wood with your own hands

Size

Let's look at how to decide on the size of the booth based on the fact that your pet has already grown:

• to determine the width of the structure, you need to measure the dog in height to the tips of the ears and add 5 cm;
• the depth of the structure is the length of the dog from the tail to the tip of the nose with an addition of 5 cm;
• To properly arrange the hole, measure the dog at the withers and add 5 cm.

If you got a puppy who will live on the street from the first days, you should refer to the table below, which gives reference sizes of kennels for dogs of different breeds:

Attention ! The dog house should be of such a size that the pet can sleep and relax comfortably in it at any time of the year. You should not make a structure that is too large, as the dog will freeze in it in winter.

It is better to make the entrance to the structure closer to the corner, so the dog will have a small closed nook.

Kennel for German Shepherd

Comfortable enclosures for dogs: do it yourself without waste or mistakes

What is the best place to build a booth?

When choosing a location for a wooden dog kennel, there are several important points to consider:

1. Good lighting - the animal needs sunlight.
2. Protection from the wind - ideal between sheds, next to the fence.
3. Availability of good shade in which the dog can hide in the summer.
4. Dryness - eliminate stagnation of moisture, puddles (the kennel is placed on a hill).
5. Proximity to the house - usually near the entrance, so that the dog guards the building and drives away strangers.

Drawing and diagram

Before you build a kennel, you need to submit a drawing of it! It is not necessary to draw up a special drawing for the booth, since the design is not complicated. You can simply draw a diagram on a simple sheet of paper and determine the dimensions of the structure on it.

If you want to build a booth with exact dimensions, then a drawing is necessary. To complete the drawing correctly, you need to consider the following nuances:

• the interior space should be spacious enough for the dog to turn around freely. If a kennel is made for a puppy, then you need to understand that he will grow up very soon, so it is better to build a large kennel right away;
• if you plan to build a warm kennel, then it is better to use wood as a material - it is practical, environmentally friendly and is an excellent heat insulator;
• if there are frosty winters in your region of residence, then it is better to prefer a kennel built as a sandwich panel with insulation between the walls;
• if a booth is being built for a large dog, then it is installed inside a special enclosure for a four-legged pet;
• It is also advisable to decide on the shape of the roof when drawing up the drawing. For a large dog, it is better to build a kennel with a pitched roof. Dogs love to lie on it in the summer. A gable roof is suitable for a small booth when you need to increase the usable area of ​​the internal space.

Developing a drawing will help to provide for all the nuances of construction and the kennel for your four-legged friend will turn out to be of high quality and comfortable.

Drawings of wooden dog houses

There are quite a lot of designs for wooden dog houses. It is based on the simplest option - a rectangular box. It can have a single or gable roof. Common models:

1. Option for a wooden dog kennel for a medium-sized breed. Suitable, for example, for a German shepherd.

2. A similar version of a wooden dog kennel with a gable roof.

3. Drawing of a booth with a vestibule. In this case, bowls with food and water can be placed in the outbuilding.

4. A wooden dog kennel with a vestibule under a common roof.

Which option to choose is up to the pet owner to decide. Each building has its own advantages.

Tools

Before you start building the structure, you should prepare the necessary tools:

• screwdriver;
• hacksaw;
• hammer;
• marker;
• ruler or tape measure;
• plane - if unplaned material was purchased;
• metal scissors.

Also, before starting work, prepare the material:

• fasteners - screws, nails;
• bars, boards, lining;
• roofing material;
• insulation;
• plywood or chipboard;
• impregnation to protect wood from external influences.

Important ! All boards and beams should be sanded before building the kennel so that the dog does not get hurt. Only the outer walls of the structure are treated with impregnation, otherwise there will be an unpleasant smell in the booth, which the dog may not like.

You also need to take care of the thermal insulation material before starting assembly, and choose the best option in terms of environmental friendliness, practicality and affordability.

Interesting booth ideas

Unusual doghouses have been a real trend for more than one season.
Chopped timber can be used to build a house. If you try, you can put up a real miniature log house. A dog in such housing will feel comfortable and at ease. If the owner and his pet are at the dacha only in the summer, then it is not necessary to insulate the house; it is possible to do an easy option by finishing the booth with imitation timber. Like people, it is much more comfortable for an animal to be in a spacious apartment. Therefore, the larger the dog, the more spacious the dimensions of the cottage should be. However, I wouldn’t dare call an apartment with an attached terrace and a canopy a kennel. On the spacious area you can put a bowl, and under the canopy lie in the shade on a hot day.

A great idea is a booth with a porch. Finish also matters. A dog's home, decorated in the same style as the house, always looks stylish and exclusive, becoming not just a traditional boring building, but a real work of art, an element of decor.

An interesting idea for a summer booth is to arrange it directly in a wooden barrel. And for the winter, you can build a house out of snow, for example, a husky will feel more than comfortable there. The main thing is to make such a structure cozy and spacious inside.

Or maybe there are children in the house and they will work as decorators, creating a booth in the style of “101 Dalmatians”

It is very important that the style and design of the house does not discord with the surrounding natural design. For example, to complement a discreet, elegant composition, it’s perfect to arrange a booth reminiscent of a gnome’s home

Successful architecture and the right choice of colors make the traditional booth an expressive element of country decor. The booth can be built in a country style, reminiscent of a cowboy ranch. With a little imagination and effort, you can create a real masterpiece that your beloved pet will love.

Material

The material deserves special attention, because its choice will determine how comfortable the dog will be. We recommend building the kennel out of wood. To construct the structure, you should prefer larch or pine wood . Pine material, if properly processed, lasts up to 13 years. Larch lasts much longer, but is also more expensive. Which of these two breeds is preferred depends on the financial capabilities and preferences of the owner.

As for roofing material, it is better to give preference to natural materials, such as tiles.

Floor

The floor in the kennel must be made of warm materials; it is unacceptable to build concrete, stone or brick flooring if you do not plan to install a heated floor system to warm the kennel. The best option would be dry, planed boards, fitted to each other. When laying the floor, it is advisable to make a technological slope to simplify cleaning in the kennel.

Walls

The walls in the booth should not be blown through, so it is better to use plywood for interior decoration. The ideal option would be walls made of the sandwich panel type; it is worth choosing the right insulation material, otherwise there is a high probability that rodents and parasites may live in it. The entrance to the structure is covered with thick fabric in the winter.

To prevent your pet's kennel from breaking down prematurely - the wood rots in a humid environment - consider a good system for removing moisture from the structure. Do not treat wood with impregnations that help repel moisture - this will have a detrimental effect on the dog’s health.

Roof

Which roof to install on the booth: single or gable, depends on the preferences of the owner. We will analyze the pros and cons of each option.

Simple lean-to

Dogs love to spend time in a kennel, especially during warm periods, so a kennel with a pitched roof is most preferable. The roof should be made with a minimum slope. It is advisable that it be on hinges - this will allow you to clean it without much effort and disinfect the structure if necessary. Even at the construction stage, you need to insulate the booth to protect the dog from the winter cold.

Let's look at step-by-step instructions with photos on how to build such a kennel yourself:

1. Construction of the flooring To create the flooring, you need to take a 4x4 cm block, cut two elements in length and 2 in width. Lay the bars on a flat surface and use self-tapping screws and corners to build a frame. For greater strength, install crossbars made of timber of the same size. Sew boards onto the frame on one side.


Floor construction

2. Assembling the frame of the booth For the frame you will need 4 bars 5x5 cm. Two bars should be equal to the height of the structure, and the second two should be 10 cm higher. Sections of bars are installed in the corners of the bottom and secured with self-tapping screws. There will be long posts in the front of the booth, short ones in the back. Check all bars for level. To strengthen the structure, additional elements are installed in the center of each wall, and in the place where the opening is arranged, two parallel bars are placed at the required distance from each other, equal to the width of the entrance.
3. Sheathing the walls As soon as the frame is ready, the front side is sheathed with a rail car. The interior of the structure is covered with plywood or chipboard. The inner lining is attached with self-tapping screws, and the caps must be recessed into the plywood by 1-2 mm, otherwise the pet may be injured.
4. Making the roof For the roof, 4x4 cm bars and OSB are used. The components are used to assemble a frame, which is equal in size to the inner perimeter of the kennel. OSB is cut out and sewn onto the inside of the flooring. The roof is insulated. Then a sheet of material is cut to the outer size and the roof structure is sewn up. It is worth remembering that the top OSB sheet should protrude beyond the booth - 10 cm from the sides, 25 cm from the front. The roof is hinged on one side, and roofing material is laid on top.
5. Finishing The booth is almost ready, all that remains is finishing. To do this, the bottom of the booth needs to be covered with roofing felt with a bend on the walls to prevent getting wet and rotting. Treat external walls with antiseptic . Using platbands, line the opening.
6. Installing the kennel Once the structure is ready, you should install it in a previously prepared place. To do this, choose a flat hill near the house and with a good view.

Interesting ! Booths with a pitched roof are much simpler in design and lighter in weight, but the useful space in them is less than that of similar structures with a roof on two sides.

Photo of a typical, comfortable dog kennel:

Gable

If you are planning a small booth, then you simply need to install a gable roof. The disadvantage of such designs is that they have a high specific gravity - dragging and lifting such booths is very problematic when cleaning.

Step-by-step instructions on how to make a gable house:

1. Frame For the frame you need to take 4 50x50 mm bars and build a bottom frame. Install racks made of bars of the same section in the corners. Place a harness on top of the posts. To strengthen the structure, install crossbars on all sides and along the bottom. Install the bars along which the hole will be formed.
2. Roof In this case, you need to construct two frames that are connected to each other at an angle of 40 degrees - the roof slopes. Place the workpiece on the frame for temporary fastening. Connect the upper part of the blanks with a ridge block. Install the rafter system.


Rafter system - marking and installation

3. Frame cladding For external cladding, lining is used; it is worth making sure that there are no cracks or gaps between the slats. The bottom is sewn up with a board and waterproofing is installed.
4. Arrangement of the roof The frame, which was temporarily fixed, is removed. The inside of the roof is covered with plywood. Roofing material is stuffed on top.

“I told you, master, install a lean-to!”

The most beautiful and cool wooden dog houses

You can take any project described above as the basis for a wooden dog kennel. But to make the booth more attractive, you should think through the design in advance. You can consider the following options:

1. Dog kennel stylized as a castle. Quite spacious, with small “vestibules” on the right and left, where you can put bowls of water and food.

2. A wooden dog house, designed as a “hollow” or a house for “gnomes”.

3. Kennel in Art Nouveau style.
   Read also:  Technology for laying soft roofs from bitumen shingles: step-by-step instructions
4. A variant of a brick building with a tiled roof. It looks especially beautiful against the background of a stone wall or brick fence.

5. Wooden kennel in Russian motifs (from a barrel).

6. Double dog house with 2 floors.

7. Kennel with enclosure. This is a full-fledged house with a summer walking area and a recreation room.

8. Capital dog kennel made of wooden frame. It is built on the same principle as ordinary houses. It is better to make the roof gable and insulate it inside. The walls can be covered with felt (and in the middle zone and especially in the south it is not necessary to do this).

Warm for the winter

You understand that if a dog’s house is located on the street, it needs to be made warm! How to insulate a booth? To build a winter insulated kennel, in addition to other materials, you need to prepare insulation. The cheapest is polystyrene foam.

How to make a warm kennel (with drawings):

1. Kennel base. Cut the 5x5 cm bars into 2 pieces of 700 mm and two of 900, resulting in a booth 900x700 mm.
2. Niche for heat insulator. You will need 4 bars - 2 x 900 mm and 2 x 600 mm using self-tapping screws to secure them to the base.
3. Insulation . Cut the insulation to size and place it between the blocks.
4. Floor arrangements . Cut boards 900 mm long and place them on the frame from the outside of the kennel.


Frame for floor with insulation


Floor insulation

5. Side walls. We arrange the side walls. To do this, take boards 650 mm long and bars 400 mm long, assemble a frame to which you can screw the boards. Install the walls and screw them to the floor at the corners.
6. Front and back walls. We construct a hole in the front wall using bars and screw it to the frame. Install the back wall last. Fasten the walls with self-tapping screws. Install insulation, cut to the size of the walls. We cover the insulated walls with boards or plywood.


Insulation of walls with foam plastic

7. The roof of the booth . Screw plywood to the walls and sew bars on it. Lay insulation. Sew up the roof insulation with boards. Lay roofing material.

The construction is complete, all that remains is to install the insulated structure in place.

Photo of a booth insulated according to all the rules:

How to build a booth in the form of a canopy

This design is suitable for summer and warm climates. Its basis is a frame in the form of a tetrahedron, flooring, a gable or flat roof on two or three pairs of rafters. The model can be supplemented with lattice or screen-type side fences (including removable ones).

This is what the result should be:

Dimensions of the booth (width x length x height) – 100x135x150 cm (height measured along the roof ridge).

To build you need:

• four racks with a cross section of 40x40 or 50x50 mm and a height of 100 cm;
• two planks-beams 40x40 or 50x50 mm for the base and top (135 cm);
• timber for rafters, section 50x50 or 40x60 mm - about 2.5 m;
• thin planks for cladding with a section of 10...15x70...80 mm, approximately 20 pieces of 135 cm each, 10 of 100 cm each and 15...18 for flooring, 90 cm each.

Roofing material is also required, in the original these are also 10x70 strips or other sections. The quantity is selected so that they cover the roof slopes tightly, without gaps. Example: for planks 15x100 mm, you will need 14...15 (depending on the size of the roof overhang) pieces about 70 cm long for each slope.

Operating procedure:

• the base is assembled - the flooring is laid on two long beams;
• racks are mounted;
• the roof base and rafters are installed;

• fencing of the sides and rear sides is carried out;

• roof decking is being done.

This “house” should be supplemented with a soft mattress for the dog. Alas, it is unlikely that one dog will be allowed to live in such a “house” - there will immediately be applicants for his kennel. Or neighbors?

What can and cannot be insulated?

When choosing insulation, do not forget that the dog relies on its instincts. It’s impossible to tell her that you shouldn’t chew the rug, or that you shouldn’t tear off the canopy that covers the hole.

Let's consider several options for insulating a dog house for the winter, their pros and cons:

• the first thing to remember is that the insulation must be closed on both sides, otherwise the dog will simply tear it apart;
• if mineral wool is used for insulation, then perlite should be laid between the wall and the heat insulator. It will not only preserve the properties of cotton wool, which can absorb moisture and lose its properties, but will also protect the dog’s respiratory tract from irritation;
• The canopy should be chosen from a dense and durable material, otherwise your pet will quickly tear it apart;
• If possible, the thermal insulation material should be natural.

Electric heating

It is possible to perform forced insulation if wiring is carried out to the booth. A warm heated kennel (such as a mat) has the following advantages:

• the temperature in the kennel is constant, even in extreme cold;
• Electric heating dries the air in the structure, which is important.

But there are also disadvantages that cannot be ignored:

1. The dog is an active and curious animal, and can get to the electric heating elements. There is a danger of electric shock.
2. If there is constant dampness, a short circuit may occur.
3. You can try and protect your dog from these troubles, but then the cost of the kennel will increase significantly.

Felt

The simplest and most inexpensive insulation that can be installed in a matter of hours:

1. Using a stationery or construction knife, cut out the elements of the required size;
2. Secure the material to the inside of the kennel using a stapler and staples.

The result is high-quality insulation with natural material that is not afraid of wind and frost. An important point is that this heat insulator has high vapor permeability.

Mineral wool

It is better not to use this heat insulator, since for high-quality insulation you will have to build a structure with thick walls, and you will have to install a vapor barrier. It is also worth noting that mineral wool has the ability to settle and get wet at high humidity, and this reduces its insulating ability by almost half.

Styrofoam

This thermal insulation material has many advantages:

• provides high-quality insulation of the structure from outside cold;
• the material does not absorb moisture, does not shrink over time, and its properties will not be lost over time;
• It’s not difficult to insulate the booth; just cut out the heat insulator boards and install them. In this case, there is no need to use a vapor barrier.

Available means

But you can also insulate the structure with available materials, such as old sweatshirts or a blanket. The insulation will be no worse than with the above methods. The only downside is that this insulation is short-lived, and the quilted jackets can harbor rodents.

Or just invite the cat